Radio Control Clock

How to use radio control movement_DCF
 
 
 
 
 
 
 
 
 
 
 
 
 
BATTERY INSERTION/REPLACEMENT 
To install and replace the battery, please follow these steps: 
1. Pull down the battery (1) compartment (at the back of the case). 
2. Insert a new battery (AA type, 1.5V, LR6), observing correct polarity as indicated in the battery compartment. . 
3. Put lid (1) back again. 
  
SETTING THE MOVEMENT AUTOMATICALLY 
Once the battery is installed properly, the movement(clock) automatically sets itself to 12 O’clock and then receiving the signal, i.e. the second hand moves to 0 position follow by the hour and minute hand move to 12:00 position. 
When the hour hand, minute hand and the second move to 12:00 position, it starts to receive the radio signal. Once it has received the radio signal and processed it accordingly (which takes 3 to maximum 12 minutes), the movement(clock) automatically displays the correct time. We recommend that you do not put up or hang up the movement/clock anywhere during this process. 
It the movement(clock) still has not set itself after 12 minutes, reception is faulty or not possible at the chosen location. Repeat setting at a different location by pressing the RESET (2) button. 
  
TO SET THE TIME MANUALLY 
Press and hold the M.SET  (3)button for 3 seconds to set the time: 
Press the M.SET(3) button for 1 second to advance 1 minute 
Press the M.SET(3) button for more than 1 second to auto advance the minute hand. 
If the M.SET(3) button is not pressed for 8 seconds, the movement( clock) is set. 
  
RESET THE MOVEMENT(CLOCK 
Press the RESET(2) button will reset the movement(clock) data 
The hour hand, minute hand and the second hand move to 12:00 position 
When the hour hand, minute hand and the second move to 12:00 position, it starts to receive the radio signal.BATTERY INSERTION/REPLACEMENT 
To install and replace the battery, please follow these steps: 
1. Pull down the battery (1) compartment (at the back of the case). 
2. Insert a new battery (AA type, 1.5V, LR6), observing correct polarity as indicated in the battery compartment. . 
3. Put lid (1) back again. 
  
SETTING THE MOVEMENT AUTOMATICALLY 
Once the battery is installed properly, the movement(clock) automatically sets itself to 12 O’clock and then receiving the signal, i.e. the second hand moves to 0 position follow by the hour and minute hand move to 12:00 position. 
When the hour hand, minute hand and the second move to 12:00 position, it starts to receive the radio signal. Once it has received the radio signal and processed it accordingly (which takes 3 to maximum 12 minutes), the movement(clock) automatically displays the correct time. We recommend that you do not put up or hang up the movement/clock anywhere during this process. 
It the movement(clock) still has not set itself after 12 minutes, reception is faulty or not possible at the chosen location. Repeat setting at a different location by pressing the RESET (2) button. 
  
TO SET THE TIME MANUALLY 
Press and hold the M.SET  (3)button for 3 seconds to set the time: 
Press the M.SET(3) button for 1 second to advance 1 minute 
Press the M.SET(3) button for more than 1 second to auto advance the minute hand. 
If the M.SET(3) button is not pressed for 8 seconds, the movement( clock) is set. 
  
RESET THE MOVEMENT(CLOCK 
Press the RESET(2) button will reset the movement(clock) data 
The hour hand, minute hand and the second hand move to 12:00 position 
When the hour hand, minute hand and the second move to 12:00 position, it starts to receive the radio signal.